ESAB Air 160 Mode D'emploi page 9

GB
12. CLEANING AND STORAGE
• Avoid inhaling any dust during cleaning
• Do not use abrasive cleaning agents or organic solvents to clean the power unit or hose. To clean all
components wipe with damp cloth dipped in warm soapy water. Dry with a soft, clean cloth. Do not attempt to
clean the filters, once fully loaded they must be replaced.
• Do not immerse the turbo unit in water or allow water to enter the unit via the air outlet or inlet.
• Refer to separate headpiece instructions for cleaning instructions.
• All equipment should be stored in a clean dry atmosphere (R.H. < 90%) within the temperature range -5°C to
+55°C. It should be protected from direct sunlight and any material known to damage plastics, e.g. petrol and
solvent vapours.
• Equipment should be transported in the original packaging. If stored correctly this equipment has a shelf life of
5 years.
Eye-Tech Spare Parts
1 Eye-Tech head Seal with Velcro Tape
2 Eye-Tech Air Channel
3 Eye-Tech Screws (2 pcs)
4 Eye-Tech Face Seal
5 Eye-Tech Flex Hose
6 Eye-Tech Velcro-tape
14 Air Channel Mounting Bracket
Air 160 / Air 190 Spare Parts
7 Small Comfort Pad
8 Air 160 Motor Unit
8 Air 190 Motor Unit
9 P2 Filter
9 P2 Odour Filter
9 P3 Filter
10 Prefilter
10 Odour Prefilter
11 Battery Small NiMH
12 UK Small Battery Charger
12 European Small Battery Charger
12 UK Large Battery Charger
12 European Large Battery Charger
12 Universal Intelligent Battery Charger
12 Multi-station (5) Charger
13 Waist Belt
15 Battery Large NiMH
16 Large Comfort Pad
17 Flame Retardant Hose Sleeve.
18 Airflow Indicator (Air 160 only)
IRL
0700 002 012
0700 002 002
0700 002 028
0700 002 019
0468 127 011
0700 002 015
0700 002 029
0700 002 021
0700 002 042
0700 002 043
0700 002 018
0700 002 041
0700 002 024
0700 002 023
0700 002 040
0700 002 013
0700 002 044
0700 002 020
0700 002 045
0700 002 031
0701 416 203
0701 416 136
0700 002 027
0700 002 014
0700 002 022
0349 501 071
0700 002 046
8