ESAB Air 160 Mode D'emploi page 2

GB
1. INTRODUCTION
The ESAB Air160/Air190 systems are powered respiratory systems for use with Eye-Tech and Albatross
welding helmets to provide respiratory protection when welding.
The equipment consists of
• Air 160 or Air 190 Power Unit
• Battery and Charger
• Belt and Comfort Pad
• Eye-TechTM or Albatross Welding Helmet
• Hose
• Filter / Prefilter
2. APPROVALS
Air 160:
When used with the Eye-Tech welding helmet or Albatross welding helmet the system complies with
prEN146rev:1995. It provides class TH2PSL protection against dusts, particles and fumes and offers a nominal
protection factor of 50.
Air 190:
When used with the Eye-Tech welding helmet or Albatross welding helmet the system complies with
EN12941:1998. It provides class TH2PSL protection against dusts, particles and fumes and offers a nominal
protection factor of 50.
CE type examination by FIOSH
Finish Institute of Occupational Health, Department of Physics notified by the Ministry of Social Affairs
And Health and identified under 0403 grants.
3. RESPIRATORY POWERED SYSTEMS
Air 160:
Your powered respirator system comprises: Fresh Air Turbo unit c/w Battery, TH3PSL Filter and Pre-filter
Battery Charger, Comfort Pad, Belt & Airflow Indicator.
Air 190:
Your powered respiratory system kit comprises: Fresh Air Turbo unit with low battery and blocked filter alarms
unit c/w Battery, TH3PSL Filter and Pre-filter Battery charger, Comfort Pad, Belt.
See attached drawing for spare parts.
4. MARKING
See instructions for use
Ni-Mh
Contains Nickel Metal Hydride
Plastic materials can be recycled
Must not be disposed of in general waste, but should be disposed of in
accordance with local Regulations regarding waste material.
Expiry Date
CE Mark
IRL
1