4.7. START AND OPERATING INFORMATION
Please have the installer fill in the following tables and re-
tain these.
These information are required to be able to set the same
values again in case the main board needs replacing.
4.7.1.
General notes
The room ventilation unit is installed in rooms
with a temperature above 12 °C.
4.7.2.
Air quantities
Due to the settings of the ventilator levels and the ratio be-
tween the supply air and the exhaust air, the following
values for the amount of air have been adjusted and set:
Ventilator
Supply air (m³/h)
level
Level 3
4.7.3.
Supply and exhaust air ratio
The following ratio between supply air and exhaust air has
been set:
Setting point
Supply air and
exhaust air ratio
Exhaust air (m³/h)
Per cent (%)
25
OII Avent P190/P310/P460