Switching On And Off Summer Mode - Pluggit Avent AP190 Manuel D'utilisation Et D'installation

2
2. Start laptop.
3. Plug the USB cable with port type A in the laptop and
port type B in USB interface (2).
4. Start Pluggit iFlow.
5. If the room ventilation unit is not automatically detected,
enter serial number and save it, see page 27.
6. Select the desired settings in Pluggit iFlow and follow
the instructions.

5.3. SWITCHING ON AND OFF SUMMER MODE

Note:
The summer mode can only be switched on and off if no
bypass (accessory) has been installed
At cooler outside temperatures, e.g. at night, the supply air
ventilator can be switched off. In this case, the outside air
can enter the house through tilted windows, without heat
recovery.
The summer mode can only be switched on if the outside air
temperature is above 14 °C. If the outside air temperature
falls below this value, the summer mode will be automati-
cally switched off.
About control unit
M+P-26A-0848
1
Press and briefly hold button (1).
The summer mode now is switched on or off.
When the summer mode is switched on, the LED (2) is
illuminated.
2
OII Avent P190/P310/P460
M+P-26A-0899
37