Setting Preset Weekly Programme And Automatic Programme - Pluggit Avent AP190 Manuel D'utilisation Et D'installation

6. Loosen differential pressure gauge and reseal openings
with rubber plug.
9
10
7. Loosen rubber plug from the connectors (10) and
connect differential pressure gauge diagonally.
5
7
6
11
8. Hold down button (11) and press button (5) to decrease
or button (6) to increase the rotational speed of the
ventilator.
The rotational speed of the left ventilator can be set
according to the chart (9).
9. Loosen differential pressure gauge and reseal openings
with rubber plug.
10. Press buttons (5) and (6) until the LEDs (7) turn off.
11. Fill in setting parameters in chart (9).
About Pluggit iFlow
1. Activating Pluggit iFlow, see page 17.
2. Follow the instructions of the Pluggit iFlow and set
rotational speed of the ventilators.
3. Fill in setting parameters in chart at the room ventilation
unit, see page 18.
4.6.6.
You can choose between a total of 10 preset weekly pro-
grammes or one automatic programme.
10
The user can subsequently select the preset weekly pro-
gramme or the automatic programme using the control unit
or the Pluggit iFlow, see page 38.
About Pluggit iFlow
1. Activating Pluggit iFlow, see page 17.
2. Follow the instructions of the Pluggit iFlow and set
weekly programme or automatic programme respec-
M+P-26A-0895
tively.
M+P-26A-0896
Setting preset weekly programme and automatic
programme
OII Avent P190/P310/P460
19