Handling (User); Control Unit; Pluggit Iflow; Activating Pluggit Iflow - Pluggit Avent AP190 Manuel D'utilisation Et D'installation

5. HANDLING (USER)

Note:
All descriptions in chapter "Handling" may be per-
formed by the user.

5.1. CONTROL UNIT

3 4
1
8
9
10 11
12
13
1 Main board
2 Control unit
3 230 V electrical connection
4 Digital input for accessories (HAC1)
5 Antenna for radio remote control (accessory)
6 Modbus connection (BMS connection)
Connector configuration RS 485
7 Access LAN connection (router)
Connector configuration RJ45 TCP/IP
8 USB port for service work
9 Switching on/off summer mode or bypass
10 Setting ventilator levels
11 Displaying the ventilator levels
12 Selecting weekly programme or need-based
programme
36
OII Avent P190/P310/P460
5 6 7
2
M+P-26A-0847
13 Reset filter alarm
Error display

5.2. PLUGGIT IFLOW

Optionally, the following operating options can be carried
out using the Pluggit iFlow:
• Switching on and off summer mode
• Switching on/off preset weekly programme or automatic
programme
• Selecting ventilator level manually
• Switching on and off fireplace feature
• Switching on/off fire booster
• Reset filter alarm
5.2.1.

Activating Pluggit iFlow

The Pluggit iFlow can be downloaded free of charge at
www.pluggit.com\downloads and installed on the laptop
after successful registration.
1. Remove designer cover (1).
1
M+P-26A-0935