Pluggit Avent AP190 Manuel D'utilisation Et D'installation page 13

A
C
2. Tighten wall rail (2) with screws (3).
A 75 mm (left or right from the wall)
B Avent P190 = 600 mm
Avent P310 = 700 mm
C 1350 mm
Note:
If the Avent P190 is connected with IPP46 90° bows
backwards to the wall, additional spacers APDH 190 are
necessary. These are available in wholesale.
Choose screws (3) with fitting dowels in accordance with
the masonry.
3. Check positioning of the wall rail (2) using a spirit level.
2
3
A
B
M+P-26A-0834
Avent P190/P310 for standard version
Place fittings (1) (accessory) in all air connections of the
room ventilation unit (2).
Avent P190 with floor air connection supply air
(Left version (A))
3
2
1
1. Seal supply air connection (1) using rubber block (2) and
blind cover (3).
1
2
M+P-26A-0837
M+P-26A-0927
11
OII Avent P190/P310/P460