According to the German Road Traffic Authori-
sation Order these important functions must be
tested each time you use the bike!
Saddle
Saddle and support must be secure
against turning (15 NM)
Observe the minimum insertion height
Balls of the feet can reach the floor
Handlebars/Front end
Handlebar tube protected against turning
(15 NM)
Observe the minimum insertion mark
Handlebar top tube secure against turning
in the front end (15 NM)
Handlebars protected against turning,
upright Seating position
Handbrake
Brake lever protected against turning
(5 NM), easily accessible
Functions properly
Brake cover clean, free of grease,
correct position
Back pedal brake
Works properly
Chain
Chain tension OK
(hangs down max. 1.5 cm)
Adequate lubrication
Chain protection complete
Tyres
Adequate profile/air pressure
(correct air pressure is on the tyres)
Wheels
Axle nuts tightened firmly (20 NM)
Centred
Tighten spokes evenly
Pedals
Installed correctly and firmly (observe L/R)
Easily turned
Bell
Sounds bright, easily reached
Front light
Sits firmly and correctly/functions ok
Dynamo
Assembly: running direction, smooth,
slack-free / easy to move
Good earth contact, connection empty
and fixed
Rear light
Sits firmly and correctly/functions ok
13
User Manual
GB