Reassembly - MOTO GUZZI V1100 Mode D'emploi

Griso V1100
8.2.2

REASSEMBLY

NOTE Grease cardan joint grooves using the recommended
product, see (LUBRICANT TABLE).
• Fit the transmission box on the swingarm; ensure that
the cardan joint fits correctly.
•
Tighten the four screws to the specified torque; follow a
cross pattern.
•
Place the reinforcement bar in its seat.
•
Insert the screw.
•
Tighten the reinforcement bar nut.
• Fit the rear wheel on the swinging arm.
•
Tighten the four screws together with the spacers.
•
Fit the cover.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
TRANSMISSION
8 - 13