MOTO GUZZI V1100 Mode D'emploi page 400

CHASSIS
•
Slide out the sleeve dust seal using a screwdriver for
leverage.
• When doing this take care not to damage the edge of
the sleeve.
•
Remove the snap ring.
•
Remove the sleeve from the slider using the sleeve as
a stop.
•
Remove the sliding bushing fixed to the slider, the
movable bushing, the ring and the oil seal.
6 - 20
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Griso V1100