MOTO GUZZI V1100 Mode D'emploi page 440

TRANSMISSION
•
Engage the first gear.
• Loosen and remove the four retaining screws; set
aside the spacers.
•
Remove the rear wheel
•
Loosen and remove the reinforcement bar nut.
• Remove the screw.
• Secure the reinforcement bar to the frame using a
clamp.
•
Remove the dust cover clamp.
8 - 4
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Griso V1100