MOTO GUZZI V1100 Mode D'emploi page 336

GENERAL TECHNICAL INFORMATION
•
Insert the pin.
• Fit the split pin.
• Push the rear brake lever until the pistons are against
the new pads.
•
Check the brake fluid level.
•
Fit the calliper to the disc and tighten the two screws.
•
Fit new ties and secure the oil line and the speed
sensor cable to the frame.
2 - 30
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Griso V1100