MOTO GUZZI V1100 Mode D'emploi page 416

CHASSIS
NOTE Use only the specific special tool: AP8140190 (tool to
tighten steering head).
•
Loosen and remove the upper ring nut with the specific
tool.
•
Remove the safety washer.
•
Set the steering bearing preload using the special tool.
•
Fit the safety washer.
6 - 36
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Griso V1100