Generator Belt Tensioning - MOTO GUZZI V1100 Mode D'emploi

Griso V1100
2.2.8

GENERATOR BELT TENSIONING

•
Working on either side, loosen and remove the three
screws securing the side body panels.
•
Working on the right side, loosen and remove the two
nuts securing the exhaust manifold, collect two
washers per nut.
•
Loosen the manifold clamp.
•
Remove the right exhaust manifold.
•
Loosen and remove the two screws securing the
control unit protection.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
GENERAL TECHNICAL INFORMATION
2 - 31