MOTO GUZZI V1100 Mode D'emploi page 364

Griso V1100
•
Loosen and remove the three screws and move aside
the clutch slave cylinder.
•
Slide out the gearbox fluid breather line.
•
Working on either side, disconnect the clamp and slide
out the oil breather line.
•
Loosen and remove the two screws securing the oil
vapour hose.
• Move aside the oil vapour hose.
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
ENGINE
5 - 9