MOTO GUZZI V1100 Mode D'emploi page 388

CHASSIS
•
Working on either side, tighten the two screws.
•
Fit the spacer in its housing, on the right-hand side of
the front wheel.
•
Fit the front wheel and insert the wheel shaft by lightly
tapping it with a rubber mallet.
6 - 8
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Griso V1100