Removing The Oil Cooler - MOTO GUZZI V1100 Mode D'emploi

LUBRICATION SYSTEM
4.1.2

REMOVING THE OIL COOLER

•
Prepare a container and empty the lubrication system.
•
Loosen and remove the screw and set aside the
washer.
•
Loosen and remove the two screws and set aside the
washers.
•
Loosen and remove the screw and set aside the
washer.
•
Loosen and remove the two screws and set aside the
tubes and the four washers.
4 - 4
www.guzzitek.org + www.guzzitech.com - Revente Interdite - Revendita Vietata - Resaling Forbiden - Wiederverkauf Verboten
Griso V1100