Maintenance - Hofmann monty 1270 smart Mode D'emploi

A
44
6-1
6-2
6

Maintenance

BEFORE ATTEMPING ANY MAINTENANCE
OR REPAIRS THE MACHINE MUST BE
DISCONNECTED FROM THE AIR AND ELECTRIC
SUPPLY.
A. Periodically clean the vertical hexagonal rod with
nonflammable liquid detergent. Lubricate with oil
(Fig. 6-1).
B. Periodically clean the turntable with a
nonflammable liquid detergent, dry and lubricate the
sliding surface of the clamps with oil.
C. Clean the teeth of the clamps (A) with a wire
brush, check the plastic rim protectors and replace if
worn (Fig. 6-2).
D. Periodically wash all plastic parts with cold water
and soap or mild chemical detergent.
E. Periodically lubricate rods of air cylinders with oil.
F. Peridically replaced the plastic insert inside
mount/demount tool.
G. Check the bead breaker pad. Replace if worn.
Operator Manual