Mounting And Demounting Motorcycle Tires - Hofmann monty 1270 smart Mode D'emploi

1
2
42
5.7 Mounting and Demounting
Motorcycle tires
To mount and demount motorcycle tires it is necessary
to utilize the optional motorcycle adaptors (1) and the
Motorcycle bead breaker blade (2).
The bead-breaking, mounting and demounting
technique is the same as per car tires.
MOTORCYCLE RIMS MUST ALWAYS BE
CLAMPED FROM THE OUTSIDE.
AIR PRESSURE TO THE TIRE CHANGER
MUST NOT EXCED 140 PSI (10 BAR) WHEN
CLAMPING MOTORCYCLE RIMS.
Operator Manual