Hofmann monty 1270 smart Mode D'emploi page 24

4
24
2
4.1-4
3
4.1-5
Only for Tubeless wheel models:
Refer to Figure 4.1-4 / 4.1-5.
F1. Press bead seater/infl ator pedal (1) on left side
of the machine half way down: air will come from
infl ation hose end only (2).
WARNING: HOLD THE TUBELESS BEADING
NOZZLE FIRMLY.
F2. Press the key on the Tubeless Beading Nozzle
(3), then press the pedal all the way down decisively
(1); a high pressure air jet exits the Tubeless Beading
device (4).
Note: Air simultaneously continues to exit the hose
connected to the tire.
WARNING: ONCE BEADING IS COMPLETE,
IMMEDIATELY STOP INTRODUCING AIR.
WHEN OPERATING THE BEADING DEVICE IT IS
MANDATORY TO WEAR EAR PROTECTORS AND
SAFETY GLASSES TO PREVENT CONTAMINATION
FROM NOISE, DUST AND CHIPS BLOWN BY THE
AIR JET.
DANGER OF TIRE EXPLOSION
Operator Manual