Adjusting The Tilt/Extend Tiller - MINN KOTA RIPTIDE FORTREX Manuel De L'utilisateur

USING & ADJUSTING THE MOTOR

ADJUSTING THE TILT/EXTEND TILLER

Your trolling motor features 7 usable handle tilt positions: 45°, 30°, and 15° up and
down from the 0° (horizontal) position. To use the down positions, you must fi rst press
the release button located on the left underside of the pivot handle.
Your trolling motor handle also features a unique stow
position, that is useful for limiting the amount of space
Handle Controls:
required for storage or travel.
Off /On, Steering, and
Forward/Reverse
Important: BEFORE attempting to put the
handle in the stowed position, the speed selector
must be in the OFF/STOW position . Failure to do
Release Button
so will damage the internal mechanism.
First press the release button located on the left underside of the pivot handle,
then push the handle down until you feel the handle "lock in" to the stowed
position. This will be almost parallel to the motor shaft.
To extend the handle, pull the handle towards you to the desired position.
The handle will extend a full 6 inches. To retract, push the handle in until it
meets the face of the motor control head.
minnkotamotors.com | 15
©2017 Johnson Outdoors Marine Electronics, Inc.