Warranty; Licenses; Information On The Internet; System Description - Burkert 2030 Manuel D'utilisation

Types 2030, 2031, 2031 K, 2032,

System Description

4.3.

Warranty

This document contains no promise of guarantee. Please refer to our
general terms of sales and delivery. The warranty is only valid if the
device is used as intended in accordance with the specified application
conditions.
The warranty extends only to defects in the diaphragm valve
Types 2030, 2031, 2031 K, 2032, 2033 and 2037 and its
components.
We accept no liability for any kind of collateral damage which
could occur due to failure or malfunction of the device.
4.4.

licenses

The approval rating on the Bürkert labels concerns the Bürkert
products.
4.5. information on the internet
The operating instructions and data sheets for Types 2030, 2031,
2031 K, 2032, 2033 and 2037 can be found on the Internet at:
www.burkert.com Documentation
2033, 2037
2033, 2037
Type 2030, 2031, 2031 K,
5. sysTeM descripTiOn
5.1. general description
The Types 2030, 2031, 2031 K, 2032, 2033 and 2037 are an externally
controlled diaphragm valve with piston drive and diaphragm seal.
The valve is self-draining in the appropriate installation position.
5.2. intended application area
The diaphragm valve of Type 2030 is designed for the control of con-
taminated and aggressive media. The valves of Type 2031, 2031 K,
2032, 2033 and 2037 can be used even for ultra-pure or sterile media
with a higher viscosity.
The valves may only control media which do not attack the housing
and seal materials (see rating plate). Information on the resistance of
materials to the media is available from your Bürkert sales office.
English
9