General Information; Contact Address; Warranty; Information On The Internet - Burkert 2100 Manuel D'utilisation

General information

4. GENERAL INFORMATION
4.1. Contact address
Germany
Bürkert Fluid Control Systems
Sales Center
Chr.-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. : 07940 - 10 91 111
Fax: 07940 - 10 91 448
E-mail: info@de.burkert.com
International
Contact addresses are found on the final pages of the printed oper-
ating manual.
You can also find information on the Internet under:
www.burkert.com
4.2.

Warranty

The warranty is only valid if the device is used as authorized in accor-
dance with the specified application conditions.
4.3. Information on the Internet
The operating instructions and data sheets for Type 2100 can be found
on the Internet at: www.burkert.com
Type 2100
5. PRODUCT DESCRIPTION
5.1. General description
The 2/2-way angle seat valve Type 2100 is suitable for liquid and
gaseous media.
It uses neutral gases or air (control media) to control the flow of
water, alcohol, oil, fuel, hydraulic fluid, saline solution, lye, organic
solvent and steam (flow media).
5.2.

Versions

There are 2 versions of the angle seat valve type 2100.
• Standard version – without separate Ex type label.
The standard version must not be used in the potentially explosive
area.
• Ex version – with separate Ex type label.
The Ex version may be used in the potentially explosive area. In
doing so, observe the specifications on the separate Ex type label
and the additional information enclosed with the device together
with safety instructions for the Ex area.
5.3.

Properties

• High tightness by self-adjusting packing glands (spindle sealing
element).
• High seat tightness by swivel plate.
• High flow values by the streamlined valve body made of stainless
steel.
english
7