Warranty Regulations - Migatronic OMEGA 220 Manuel D'instruction

MAINTENANCE
The machine requires periodical maintenance and
cleaning in order to avoid malfunction and cancellation
of the guarantee.
WARNING !
Only trained and qualified staff members can carry
out maintenance and cleaning. The machine must
be disconnected from the mains supply (pull out
the mains plug!). Thereafter, wait around 5
minutes before maintenance and repairing, as all
capacitors need to be discharged due to risk of
shock.
Wire cabinet
- Regularly, clean the wire cabinet with compressed
air and check if the grooves and teeth on the wire
drive rolls are worn out.
Power source
Clean the fan blades and the components in the
-
cooling pipe with clean, dry, compressed air as
required.
A trained and qualified staff member must carry out
-
inspection and cleaning at least once a year.
Cooling unit
Liquid level and frost protection must be checked
-
and cooling liquid refilled as required.
Drain the cooling liquid out of the cooling module
-
and welding hoses. Remove dirt and flush with
pure water in the tank and cooling hoses. Fill up
with new cooling liquid. The machine is delivered
with a cooling liquid of type propan-2-ol in the ratio
23% propan-2-ol and 77% demineralized water,
which provides an anti-freeze solution up to –9°C.
(See article number in the spare parts list).

WARRANTY REGULATIONS

Migatronic welding machines are quality-tested
continuously throughout the production process and
undergo a thorough, quality-assured final function test
as assembled units.
Migatronic provides 24 months warranty,
corresponding to 1,600 arc hours, on all types of
Migatronic welding machines, subject to registration of
the welding machine.
Registration must be made on the online address:
www.migatronic.com/warranty. The certificate of
registry is proof of the registration and will be sent by
e-mail. The original invoice and the certificate of
registry will document to the buyer that the welding
machine falls within the scope of a 24 months
warranty period.
If registration is not made, the standard warranty
period is twelve months for new welding machines, as
from the date of invoicing to end user. The original
invoice is documentation for the warranty period.
Migatronic provides warranty according to the
warranty conditions in force through remedying
defects in the welding machines that can be proved to
be caused by improper materials or workmanship in
the warranty period.
As a main rule, warranty is not provided for welding
hoses as they are considered to be wear parts;
defects that occur within four weeks after putting into
operation and which are caused by improper materials
or workmanship will, however, be considered warranty
claims.
All forms of transport in connection with a warranty
claim fall outside the scope of Migatronic's warranty
and will take place for buyer's own account and risk.
We refer to Migatronic's warranty conditions at
www.migatronic.com/warranty
28