Warranty Regulations - Migatronic DELTA 200 DC HP Manuel D'instruction

WARRANTY REGULATIONS

Migatronic continuously carries out quality control
throughout the manufacturing process as well as
check of the complete units through
comprehensive testing.
Migatronic provides warranty in accordance with
the following provisions, by correcting errors and
defects on units, that demonstrably and within
the warranty period may have been caused by
faulty material or workmanship.
The warranty period is 24 months for new
welding machines, 12 months for new
accessories and 6 months for spare parts. The
warranty period is calculated from the date of
invoice to the end user from Migatronic or
Migatronic's dealer/distributor. In the case of
sales through Migatronic's dealer/distributor, the
warranty period expires in any event within 36
months for new welding machines and 30
months for spare parts from the date of invoice
from Migatronic to the dealer/distributor. This
extension in no way extends the warranty period.
The original invoice is proof of the warranty
period.
Welding torches are considered as wearing
parts, and only errors and defects found within 6
weeks upon delivery and due to faulty material or
workmanship, will be considered under warranty.
Warranty repairs neither extend nor renew the
warranty period.
Any transport of goods or persons in connection
with a warranty claim is not covered under
Migatronic's warranty obligation and will
therefore be at the buyer's expense and risk.
Please also refer to
www.migatronic.com/warranty.
20