Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.2. Adding/Deleting Somfy RTS control points and sensors
6.2.1. Adding/Deleting an RTS control point
• Find an RTS control point programmed in the motor.
• Press the PROG button on the RTS control point (A) until
the E.V.B.moves briefly: the motor is in programming
mode.
• Press the PROG button on the RTS control point (B)
briefly. The E.V.B. moves briefly.
The RTS control point has been programmed or deleted
from the motor.
6.2.2. Adding/Deleting an RTS sensor
• Find an RTS control point programmed in the motor.
• Press the PROG button on the RTS control point (A) until
the E.V.B. moves briefly: the motor is in programming
mode.
• Press the PROG button on the RTS sensor (C) briefly. The
E.V.B. moves briefly.
The RTS sensor is programmed or deleted from the motor.
6.2.3. Deleting all the RTS sensors
• Find an RTS control point programmed in the motor.
• Press the PROG button on the RTS control point (A) until
the E.V.B. moves briefly: the motor is in programming
mode.
• Press and hold the PROG button on the RTS sensor (C)
for 7 seconds. The E.V.B. moves briefly twice.
The RTS sensors are deleted from the motor.
Copyright © 2013-2017 SOMFY ACTIVITES SA. All rights reserved.
5072038D J4 RTS.indd 81
+
PROG.
PROG.
A
B
PROG.
PROG.
A
B
-
PROG.
PROG.
A
B
PROG.
PROG.
A
B
+
PROG.
PROG.
C
A
PROG.
PROG.
A
C
-
C
PROG.
PROG.
C
A
PROG.
PROG.
A
Images not contractually binding
EN
C
C
C
C
C
C
81
31/05/2017 11:18:45
Publicité
Chapitres
Table des Matières
