Installation; Open Below; 58 X 56 Mm Head Rail, Open Above - SOMFY J4 RTS Notice Installateur

EN

2. INSTALLATION

2.1 57 X 51 mm or 58 x 56 mm head rail, open below
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1,35 N.m +/- 20%
• Connect the connection cable (3) to the motor.
Ensure that the cable does not pass over a rotating part
of the motor or mechanism.
• Compress the edge of the head rail (4) into the motor
zone.
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the small acoustic tapes (6a).
• The shaft can be fitted into the adapter using a
headless screw (7).
Tightening torque = 2 N.m maximum

2.2 58 x 56 mm head rail, open above

Installation with external clips
• Screw the 2 adaptors (1) using 2 M3x8 bolts (2) on
the motor shaft.
Tightening torque = 1,35 N.m +/- 20%
• Connect the connection cable (3) to the motor.
Ensure that the
a rotating part
• Insert the motor into the head rail (4).
• Using the clips (5), attach the motor in the head rail
(4) above the small acoustic tapes (6a).
• The shaft can be fitted into the adapter using a
headless screw (7).
Tightening torque = 2 N.m maximum
70 Images not contractually binding
5072038D J4 RTS.indd 70
cable does not pass
of the motor or mechanism.
Copyright © 2013-2017 SOMFY ACTIVITES SA. All rights reserved.
1
2
7
7
5
7
2
1
over
5
2
3
7
1
5
4
6a
3 7
2
1
4
6a
31/05/2017 11:18:39