Table des Matières
Publicité
GB-F-NL-28
Fig.18
Fig.19
OPERATING USING THE CROSS CUT LATCH
(B Fig.18)
When cutting the two front units automatically have
their lift restricted by the cross cut latch. When
engaged all the units lift to the same height reducing
turn round time. The two front units can be raised fully
for transport by operating the cross cut latch foot pedal
(B) and holding it down while raising the units..
IMPORTANT NOTE DO NOT TOW THE MACHINE
PUSHING THE MACHINE WITH THE ENGINE
STOPPED
The free wheel control is provided to allow the
machine to be moved when the engine is stationary.
Rotate the contrl valve handwheel (A Fig.19) one full
turn. Ensure the valve is fully closed before starting
the engine.
DO NOT exceed the following speeds and distance
when moving the machine in 'Free Wheel'.
Maximum Speed:
Maximum Distance:
DO NOT allow the machine to free wheel down slopes
even when unloading down ramps.
GB
1.5 Km/Hr (1 mph)
2Km (1 1/4 miles)
Publicité
Table des Matières
