Table des Matières
Publicité
GB-F-NL-62
Fig.48
Fig.49
SEAT
The seat can be adjusted for operator's weight and leg
reach to provide a comfortable position for operating
the machine.
1. ADJUSTMENT FOR OPERATOR WEIGHT
To Adjust:
The position of the adjusting knob is on the front of the
seat(A Fig.48), in the centre below the seat cushion.
By rotating the knob clockwise the weight capacity is
increased and by rotating the knob anticlockwise the
weight capacity is decreased.
2. FORE AND AFT ADJUSTMENT
To Adjust:
The position of the adjusting lever is on the right hand
side of the seat below the seat cushion (B Fig.48). By
moving the lever towards the seat, the seat can be slid
backwards and forwards. When in the desired position
release the lever to locate in one of the pre set
positions.
3. BACK REST ADJUSTMENT
The back rest has three preset positions
To Adjust:
The position of the release lever is on the left hand
side of the seat back rest (A Fig.49). Move the lever
upwards to move the upper part of the back rest
forward. Move the lever downwards to move the upper
part of the back rest rearwards.
NOTE:The seat is fitted with a microswitch to sense
operator presence.
GB
Publicité
Table des Matières
