Ingersoll Rand HA1 Manuel D'installation page 10

The use of replacement parts other than Ingersoll-Rand Material
Handling may invalidate the Company's warranty. For prompt service
and genuine Ingersoll-Rand Material Handling parts provide your
nearest Distributor with the following:
1. Complete model number as it appears on the nameplate.
2. Part number and part name as shown in parts manual.
3. Quantity required.
Hoist repair and maintenance should only be carried out by an
Authorized Service Repair Center. Contact your nearest
Ingersoll-Rand office for details.
The original language of this manual is English.
PARTS ORDERING INFORMATION
Return Goods Policy
Ingersoll-Rand will not accept any returned goods for warranty or
service work unless prior arrangements have been made and written
authorization has been provided from the location where the goods were
purchased.
Hoists returned with opened, bent or twisted hooks, or without chain
and hooks, will not be repaired or replaced under warranty.
Disposal
When the life of the hoist has expired, it is recommended that the hoist
be disassembled, degreased and parts separated by material so that they
can be recycled.
SERVICE AND MAINTENANCE
Hoist Parts and Maintenance information is available in English by
requesting the following publications:
HA1 Hoist Parts, Operation and Maintenance Manual Form Number
MHD56075.
HA2 Hoist Parts, Operation and Maintenance Manual Form Number
MHD56055.
Accu-Trol® Pendant Parts, Operation and Maintenance Manual Form
Number MHD56014.
9