Authorized Use; Restrictions - Burkert 8690 Manuel D'utilisation

Authorizeduse
2 auThOrizeD use
non-authorized use of the pneumatic control unit type
8690 may be a hazard to people, nearby equipment and the
environment.
The device is designed to be mounted on pneumatic actuators of
process valves for the control of media.
▶ In the potentially explosion-risk area the Pneumatic Control Unit
Type 8690 may be used only according to the specification on the
separate approval sticker. For use observe the additional instruc-
tions enclosed with the device together with safety instructions
for the explosion-risk area.
▶ Devices without a separate approval sticker may not be used in a
potentially explosive area.
▶ Do not expose the device to direct sunlight.
▶ Use according to the authorized data, operating conditions and
conditions of use specified in the contract documents and oper-
ating instructions. These are described in the chapter entitled "6
Technical data".
▶ The device may be used only in conjunction with third-party devices
and components recommended and authorized by Bürkert.
▶ In view of the large number of options for use, before installation, it
is essential to study and if necessary to test whether the Pneumatic
Control Unit is suitable for the actual use planned.
▶ Correct transportation, correct storage and installation and care-
ful use and maintenance are essential for reliable and faultless
operation.
▶ Use the Pneumatic Control Unit Type 8690 only as intended.
Type 8690
2.1

restrictions

If exporting the system/device, observe any existing restrictions.
english
5