Authorized Use; Restrictions; Basic Safety Instructions - Burkert 2101 Manuel D'utilisation

Authorizeduse
2 auThOrizeD use
non-authorized use of the globe valve type 2101 may be a
hazard to people, nearby equipment and the environment.
▶ The device is designed for the controlled flow of liquid and
gaseous media.
▶ The admissible data, the operating conditions and conditions of
use specified in the contract documents, operating instructions
and on the type label are to be observed during use. These are
described in the chapter entitled "5 Product description".
▶ The device may be used only in conjunction with third-party
devices and components recommended and authorized by
Bürkert.
▶ Correct transportation, correct storage and installation and
careful use and maintenance are essential for reliable and fault-
less operation.
▶ Use the device only as intended.
2.1

restrictions

If exporting the system/device, observe any existing restrictions.
Type 2101
3 Basic safeTy insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the installation,
operation and maintenance of the devices.
• local safety regulations, whereby the operator is responsible for their
compliance, by the installation personnel too.
DanGer!
danger – high pressure!
▶ Before dismounting the lines and valves, turn off the pressure
and vent the lines.
risk of electric shock!
▶ Before reaching into the device, switch off the power supply
and secure to prevent reactivation!
▶ Observe applicable accident prevention and safety regulations
for electrical equipment!
WarninG!
risk of injury when opening the actuator!
The actuator contains a tensioned spring. If the actuator is
opened, there is a risk of injury from the spring jumping out!
▶ The actuator must not be opened.
risk of injury from moving parts in the device!
▶ Do not reach into openings.
english
5