Authorized Use; Predictable Misuse; Basic Safety Instructions - Burkert 6213 Manuel D'utilisation

3.

auThOrized use

Non-intended use of the safety shut-off device Type
6213 may be a hazard to people, nearby equipment
and the environment.
• The electric safety device is designed for heating oils DIN
51603 Part 1 as well as diesel fuel according to DIN EN
590 with viscosity 1.6 – 21 cST.
• Use according to the authorized data, operating and
service conditions specified in the contract documents
and operating instructions. These are described in the
chapter on "Technical data".
• The device may be used only in conjunction with third
party devices and components recommended and
authorised by Bürkert.
• Correct transportation, storage and installation, and
careful use and maintenance are essential for reliable
and faultless operation.
• Use the device only as intended.
3.1. restrictions
If exporting the system/device, observe any existing
restrictions.
english
4
4. basic safeTy
insTrucTiOns
These safety instructions do not make allowance for any
• contingencies and events which may arise during the
installation, operation and maintenance of the devices.
• local safety regulations – the operator is responsible for
observing these regulations, also with reference to the
installation personnel.
Danger!
Danger – high pressure!
• Before loosening the lines and valves, turn off the pres-
sure and vent the lines.
Risk of electric shock!
• Before reaching into the system, switch off the power
supply and secure to prevent reactivation.
• Observe applicable accident prevention and safety
regulations for electrical equipment.
Risk of burns due to hot surface of the device!
• Do not touch the device with bare hands.
english
6
All manuals and user guides at all-guides.com

3.2. predictable misuse

• Do not put any loads on the housing (e.g. by placing objects
on it or standing on it).
• Do not make any external modifications to the device
housings. Do not paint the housing parts or screws.
• The electric safety device is designed for heating oils DIN
51603 Part 1 as well as diesel fuel according to DIN EN
590 with viscosity 1.6 – 21 cST. The use of other media
is not permitted without a prior agreement with the Bürkert
sales office.
Risk of injury due to malfunction of valves with alter-
nating current (AC)!
Sticking core causes coil to overheat, resulting in a
malfunction.
• Monitor process to ensure function is in perfect work-
ing order.
Risk of injury due to impaired function after external
fire!
• After an external fire, check equipment and safety device.
• If there is visible damage, replace safety device.
Risk of short-circuit/escape of media through
leaking screw joints!
• Ensure seals are seated correctly.
• Carefully screw together coil and device socket or valve
and connection plate.
Type 6213
english
5
english
7