Technical Specifications; General Characteristics; Description; Composition Of A Standard Supply - Tractel Mobifor Manuel D'installation

"Shock absorber": Device used to absorb energy and
limit the load of a falling person.
"Waterproofing": Covering on a terrace roof ensuring
waterproofing.
"Fall-arrest harness": Harness worn by worker on
body and designed to stop a fall. The fall-arrest harness
is formed by webbing and buckles. It comprises fall-
arrest attachment points marked with an A if they can
GB
be used alone, or marked with an A/2 if they must be
used in combination with another A/2 point. Compliant
with standard EN 361.
2.2 Pictograms
"DANGER": Placed at the beginning of a line,
designa tes instructions given to prevent injury to
personnel, in particular fatal, serious and light injuries,
and damage to the environment.
"IMPORTANT": Placed at the beginning of a
line, designates instructions given to prevent a failure
or damage to equipment, but not directly endangering
the life or health of the operator, or other persons,
and/or not likely to cause damage to the environment.
"NOTE": Placed at the beginning of a line,
desi gnates instructions given to ensure efficient and/or
com fortable use of an installation, a utilisation method
or a mainte nance operation.
You must read the user manual.
Enter information on inspection sheet.
Enter the information on the detachable inspection
sheet given on the central page of this manual.

5. Technical specifications

5.1 General characteristics

The dimensions given in the table below are referenced on fig. 2.
P (kg)
375
P: Weight of unit
So: Circumscribed area (fig. 2)
Sg: Clearance area (fig. 2)
18 18
L1 (mm) L2 (mm)
2134 2084
OK
CORRECT USE
Correct use of the equipment.

3. Description

The Mobifor fall-arrest safety system is a portable
mansafe fall-arrest anchor point. The system is fast and
easy to set up. One of its main advantages is that it is
manually transportable when disassembled, with all of
the parts of the anchor system having a weight of less
than 22 kg. The system can be set up on a roof or
terrace with no need for drilling into the roof covering,
thus reducing the risk of leaks and the need for
additional maintenance.
The Mobifor fall-arrest system can be used on PVC and
asphalt and gravel type waterproofing in accordance
with the requirements of directive 1907/2006/CE and
standard ISO11014-1, and with EPDM roof coverings
(100% vulcanised synthetic rubber made of Ethylen-
Propylen-Diene Monomer rubber with two sheets
standard mixture) at inclinations of less than 5°.
The Mobifor anchor system is certified per standard
EN 795 class E dated 1996 as a deadman anchor point
for use by 1 person only.
4. Composition of a standard
supply
The Mobifor anchor system standard supply com -
prises :
• 16 concrete weights, each weighing 22 kg (fig. 1,
item 1).
• 4 weight-holder arms made of galvanised steel
(fig. 1, item 2).
• A central structure made of galvanised steel (fig. 1,
item 3).
• A shock absorber secured to the central structure
and rotating freely (fig. 1, item 4).
• An attachment point (fig. 1, item 5).
• An absorber swivel pin (fig. 1, item 6).
• An anchor point nameplate (fig. 1, item 7).
• A plastic bag containing this installation, utilisation
and maintenance manual.
H (mm) So (m 2 2 )
162 2.9
Sg (m 2 )