Disposal And Environmental Protection - Ecolab EcoPro-ES-00510X-PFC-00S-1S-S0 Manuel D'utilisation

14.3

Disposal and environmental protection

ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Incorrect disposal can be a threat to the environment.
– Electrical scrap, electronic components, lubricants and other operating
fluids must be disposed of by approved waste disposal service providers
– If in doubt, contact your local authority, or an approved waste disposal
service provider, for information on correct disposal.
All components are to be disposed of in accordance with prevailing local
environmental regulations. Dispose of them accordingly, depending on the
condition, existing regulations and with due regard for current requirements
and criteria.
Prior to disposal, all parts which are in contact with media must be
decontaminated. Oils, solvents, detergents and contaminated cleaning tools
(brushes, cloths, etc.) must be disposed of in compliance with local
requirements, in accordance with the prevailing waste code and with due
attention to the notes contained in the manufacturers' safety data sheets.
Decommissioning / dismantling / environmental protection
ENVIRONMENT!
Reduction or avoidance of waste from reusable raw
materials
Do not dispose of any components in the domestic waste.
Take them instead to the appropriate collection points for
recycling.
We would like to point out the need for compliance with the
WEEE Directive 2012/19/EU, the aim and purpose of which
is to reduce or avoid waste from recyclable raw materials.
This directive requires member states of the EU to increase
the collection rate of electronic waste so that it can be
recycled.
Recycle the dismantled components:
– Scrap metals.
– Electrical waste and electronic components must be
recycled.
– Recycle plastic elements.
– Dispose of all other components in line with their
material characteristics.
– Hand in batteries at communal collection points or
dispose of them through a specialist.
85 417102264 Rev. 5-01.2019