Storage; Identification Of The Installation - Nameplates - Ecolab EcoPro-ES-00510X-PFC-00S-1S-S0 Manuel D'utilisation

General information
Symbols on the packaging
Symbol Name
Keep this product
Protect against
Stack limiting
Electrostatic
sensitive device
1.9

Storage

Under certain circumstances, instructions for storage, which go beyond the
requirements listed here, can be found on the package.
These must be complied with accordingly.
Please note the following storage conditions:
n Do not store outdoors.
n Store in a dry and dust-free place.
n Do not expose to aggressive media.
n Protect from sunlight.
n Avoid mechanical vibrations.
n Storage temperature: +5 to 40° C.
n Relative humidity: max. 80 %.
n For storage periods of more than 3 months, check the general condition of all parts
and packaging regularly. If necessary, refresh or renew the preservative.
1.10

Identification of the installation - Nameplates

All information for the identification of the installation or the information on the
nameplate of the installation and all components are located in the chapter
"Technical Data ".
Important for inquiries is the correct specification of the designation and the
type. This is the only way of ensuring that we can answer your query correctly
and quickly.
417102264 Rev. 5-01.2019
Description
The individual package must always be transported, handled and stored in
such a way that the arrows point upwards at all times.
Top
Rollers, flaps, heavy tipping or edges and other forms of handling must be
avoided. ISO 7000, No 0623
The symbol shall be affixed to goods that are very fragile.
Fragile Goods marked as such must be handled with care and in no way dropped
or laced. ISO 7000, No 0621
Goods marked as such must be protected against excessive humidity and
must therefore be stored in a covered location.
If particularly heavy or bulky individual packages cannot be stored in
dry
warehouses or sheds, they must be covered with a canvas.
ISO 7000, No 0626
Goods marked as such must be protected against excessive cold. These
cold individual packages should not be stored outdoors.
Maximum number of identical individual packages that can be stacked,
where n stands for the number of permissible individual packages.
ISO 7000, No 2403
Avoid touching individual packages marked as such at low relative humidity,
especially when wearing insulating footwear or when the substrate is not
conductive.
Low relative humidity is to be expected especially on warm, dry summer
days and very cold winter days.
10