Honda FF500 Manuel De L'utilisateur page 65

Poor tilling performance.
Order Check item
1 Differential lock lever Set the lever in the ''LOCK'' position.
2 Front wheel
3 Rear wheel
4 Handlebar height
5 Bolts/nuts
6 Rotary
7 Tines
8 Main clutch cable
9 Engine speed
10 Throttle cable
Differential/differential lock does not function properly.
Order Check item
1 Differential lock lever Operate properly.
2 Differential lock arm
3 Differential lock cable Adjust the differential lock lever freeplay properly.
DIFFERENTIAL LOCK ARM
62
Condition/Remedy
Set in the proper position according to the tilling
depth.
Set the right and left rear wheels symmetrically.
Set the handlebar in the proper position.
Tighten securely.
Remove the foreign material (grass, etc) if it is
caught in the rotary.
Assemble the tines properly.
Adjust the main clutch cable properly.
If the engine speed is too low, move the throttle
lever to increase the engine speed.
Adjust the throttle lever free play properly.
Condition/Remedy
Remove the foreign material (stone, etc.) if it is
caught in the area.
FOREIGN MATERIALS
Refer to page
33
25
27
28
20
49 and 50
54 and 55
47
—
46
Refer to page
33
See below
48