Gear Selection - Honda FF500 Manuel De L'utilisateur

Gear selection

CAUTION:
Return the throttle lever to the low speed position and disengage the clutch
before moving the gearshift lever. Avoid using excessive force on the
gearshift lever.
Select a gear position in accordance with the contents of the Gear Selection Table
(page 30).
• Always operate the gearshift lever after the main clutch has been disengaged.
• If the gearshift lever is difficult to operate, squeeze the main clutch once and
then disengage the main clutch and operate the gearshift lever again.
• In reverse operation, be especially careful of your feet and observe the
following precautions:
– Make sure there are no people or obstacles behind you.
– Lower the engine speed.
– Hold the handlebar with both hands and support it firmly.
– Gently engage the clutch and make sure that it can be disengaged at any
time.
GEARSHIFT LEVER
29