Honda FF500 Manuel De L'utilisateur page 52

Rotary tines inspection and replacement
• Wear heavy gloves to protect your hands.
• Carry out the check or replacement work with the tiller on the level spot
and the engine stopped. Disconnect the spark plug cap to prevent an
accidental start-up.
• Place a wooden block under the rotary tine to prevent rotary form
dropping.
• The inside and outside tines rotate in opposite directions. Be careful of the
movement of the tines when checking or replacing the rotary part. The
rotary tines may turn in an unexpected direction, resulting injury.
• Incorrect arrangement of the tines or installing tines in wrong direction
might case the tiller to move backward or move to an unexpected
direction, resulting injury.
Before starting check or replacement work, set the front wheel to the lowermost
position (for transporting see page 25) and place the tiller on a firm level ground
and secure it not to move.
49