Maintenance Section - Manitowoc SM Serie Manuel D'installation, D'utilisation Et D'entretien

Maintenance
Spray Bar Disassembly
The spray bar supplies water to the individual ice-
making cups. Water from the water pump sprays through
the nozzles, located on the upper portion of the tubes.
1. Grasp one end of the spray bar, lift up and remove
from seat formed in evaporator bucket.
2. Remove clamp on water inlet tubing by grasping
both ears on clip and separating.
3. Apply food grade lubricant to ease re-assembly of
spray bar components when necessary.
4. To re-install spray bar, position water inlet tubing on
inlet ports, and squeeze clips until tight.
5. Reposition assembly on water trough seat.
Nozzles and inserts can be removed for cleaning by
unscrewing nozzles. Inserts are located inside the spray
bar ports. The spray bar also disassembles for easy
cleaning.
Remove
Clamp
Spray Bar Removal
20
Water Filter
To replace the water filter incoming water does not need
to be turned off.
1. Turn the filter 1/4 turn counter clockwise and it will
pop out.
2. Reverse the process to re-install.
Water Filter Replacement
Section 4
Part Number 040001361 05/10