Product Properties And Material - KLS Martin group IXOS 90-512-58-10 Mode D'emploi

Instructions for Use
®
IXOS Radius Plate System
All commonly used implants are supplied in unsterile
•
condition and must be reprocessed appropriately before
use, see chapter 10, page 27. The packaging material must
be removed before reprocessing the products.
Each packaging is marked with a batch number that must
•
always be indicated together with the item number in case
of a complaint.
Rarely demanded implants (solely plates) are supplied
•
individually in a steam-sterilized and correspondingly
marked packaging. If the sterile packaging is damaged, the
product must not be used. The sterile packaging is marked
with the item number, the implant description, expiration
date of the sterility as well as the batch number. In the
event of a complaint, this information must always be
indicated for traceability purposes. The sterile packaging
itself is protected by a secondary packaging.
Storage of the sterile implants must only be done in the
•
originally supplied sterile packaging. When the sterility has
expired, the implants must only be used again after re-
sterilization.
3

Product Properties and Material

®
The IXOS Radius Plate System is used in the field of hand,
accident and reconstructive surgery and orthopedics especially
for the fixation of acute distal intra- and extra-articular
fractures of the radius. The system consists of various plates,
screws and instruments for different treatment options
including the corresponding storage.
These implants are designed exclusively for the purpose
described here.
All system components are intended for single use and must
not be reused. All non-sterile components must undergo an
appropriate treatment process prior to use.
Revision 1 21