Start - Burkert 8025 Notice D'utilisation

3 INSTALLATION
3.3 Connection of the sensor to the flow indicator in wall-mount
version
The connection of the flow sensor 8020/8030 is done on the supply plate thanks to a 4-
pole terminal strip (see Fig. 3.4).
Fig. 3.4 Connection of the sensor

3.4 Start

Remove the cover of the housing and put
swich to ON (see fig. 3.5). The ENTER
key can be locked by switching switch
in position "ENTER locked" (see § 5.2).
FLOW INDICATOR - TOTALIZER 8025
Fig. 3.5 ON/OFF swich
E-8-
1
8020
3
Switch
Switch
ENTER locked
ENTER not locked
2