Installation - Burkert 8025 Notice D'utilisation

3 INSTALLATION

3.2 Installation
Compact version
The flow indicator totalizer can be easily
installed into pipes using our specially
designed fitting system.
1. The fitting must be installed into the
pipe according to the installation
specifications in section 3.1.
2. Insert plastic nut
plastic ring snap into guide bush
3. Carefully insert totalizer
installed properly, the device cannot be
rotated.
4. Tighten transmitter housing to fitting
with plastic nut .
Caution! Plastic nut must only be
tightened by hand!
Fig. 3.2 Installation compact version
FLOW INDICATOR - TOTALIZER 8025
into fitting and let
.
into fitting. If
Wall-mount version (see Fig. 3.4)
The flow indicator-totalizer in wall-mount
version is equiped with 4 fixing holes in the
bottom of the enclosure. Remove the white
blanking stripes and open the cover to
access to fixing holes
installation, please consult 8020/8030
instruction manual.
Fig. 3.3 Installation wall-mount version
E-7-
. For sensor