Flow Indicator - Totalizer 8025; Introduction; Unpacking And Control; About This Manual - Burkert 8025 Notice D'utilisation

1 INTRODUCTION

Dear Customer,
BEFORE INSTALLING OR USING THIS
PRODUCT, PLEASE TAKE OUR ADVICE
AND READ THE ENTIRE MANUAL
THOROUGHLY.
This will enable you to fully profit from all of
the advantages offered by this product.

1.1 Unpacking and Control

Please verify that the product is complete
and free from any damage.
If there is any loss or damage, please
contact your local Bürkert subsidiary.

1.2 About this Manual

This manual does not contain any warranty
statement. Please refer to our general
terms of sale and delivery.
Only properly-trained staff should install
and/or repair this product. If difficulties
should occur at the time of installation,
please contact your nearest Bürkert sales
office for assistance.

FLOW INDICATOR - TOTALIZER 8025

1.3 User's Responsibility for Safety

Bürkert manufactures a broad range of flow
transmitters. While each of these products
is designed to operate in a wide variety of
applications, it is the user's responsibility to
select a transmitter model that is
appropriate for the application, install it
properly, and maintain all components.
Special attention must be paid to the
chemical resistance of the transmitter
against the fluids which are directly
contacting the product.

1.4 Electromagnetic compatibility

This device conforms to the EMC-Directive
of the Council of European Communities
89/336/EEC.
E-2-
This symbol appears in the
manual to call special attention
!
to instructions that affect the
safe installation, function and
use of the product.