Assembly Of The Basic Components - SKYLOTEC Skyline SL-100 Instructions D'utilisation

Assembly of the basic components

Assembly of the SL-009-I terminal anchor and SL-006-90/135 curves on Plus system supports
The SL-009-I terminal anchor or SL-006-90/135 curves are designed for attachment to SECUPIN plus system
supports. In this case, the existing oval-headed screws with internal hex M12 x 25 DIN ISO 7380 are used.
Assembly of the SL-009-T terminal anchor and SL-006-90/135 curves on concrete or steel substrates
The SL-009-T terminal anchor or SL-006-90/135 curves are designed for attachment to concrete or steel substrates.
Concrete substrates: In this case, all types of heavy load anchor or concrete screw made from 12 mm diameter
stainless steel can be used, for example (note the manufacturer's instructions for use).
Steel substrates: In this case, machine bolts with a hardness of 8.8 or A-70 M12 stainless steel can be used that
are approved in accordance with the technical building requirements.
Washer, Ø 13mm
Not with concrete screw
MAT-MA-0012-04_GB SKYLINE
Oval-headed screw
M12x25
Stainless steel washer, Ø 13mm
SL-009-I terminal
anchor
or
SL-006-90/135 curve
Plastic washer, Ø 13mm
Plus system support
Machine bolt or
heavy load anchor
or concrete screw
2 x with SL-009-T
1 x with SL-006-
90/135
SL-009-T terminal anchor
or
SL-006-90/135 curve
18.06.2018
Washer, Ø 13mm
Not with concrete screws
Page 14 of 23