SKYLOTEC Skyline SL-100 Instructions D'utilisation page 35

Attaching the SKYLINE OVERHEAD RUNNER (SL-101-V) to the rope
Every user must use a separate slider. Only sliders approved by the manufacturer may be used. The runner is only
attached to one system, which has been installed overhead on the wall, or with specially calculated sub-
constructions to which the brackets have been attached like on a wall.
Position:
Ensure that the OVERHEAD Runner (SL-101-V) is attached in the correct position in order to run freely over the
intermediate structural anchor.
Attachment to the safety rope
To release the OVERHEAD Runner (SL-101-V) from the rope, the process described above must be followed in
exactly the reverse order.
MAT-MA-0012-04_GB SKYLINE 18.06.2018 Page 9 of 23