Parts List - GRAUPNER Tangent Alpina 4001 PRO Notice De Montage

Parts List.

Qty Description
1 Set assembly instruction
1 Fuselage
1 Canopy
1 Set wing panels
1 Set tail-plane halves
1 Rudder
1 Set wire/Plastic parts
1 Set wooden parts
Hardware
1 pack
1 Set servo locks
1 Wing joiner
1 Decal set
Wire Set
2 Piano wire
1 Piano wire
1 Bowden tube
1 Hinge rod
* Elevator push-rod is pre-installed in the fuselage
Wooden Parts
1 Grooved moulding
2 Compression strut
1 Servo mounting tray
1 Battery mount
2 Bowden support
Accessories
11/13 Metal clevis *
14 Clevis adaptor
4 Threaded rods
1 Eye bolt
2 Control horns
2 Control horns
6 Lock nuts
2 Multilock plug
2 Piano wire
2 Belcrank assembly
1 GRP leaf spring
4 Incidence pins
2 Sheet metal screws
3 Eye bolt
Graupner GmbH & Co. KG * Henriettenstraße 94-96 * D - 73230 Kirchheim/Teck *
23
Purpose
accessory
Push rod *
Aero-tow
release
Aero-tow
release
Rudder hinge
Canopy retainer
Fuselage
Fuselage
Fuselage
Fuselage
Control linkages
Control linkage
Control linkages
Rudder horn
Aileron linkage
Flap linkage
Control linkages
Wing retainer
Elevator joiners
Elevator
Canopy
Wing panels
Battery mount
Rudder hinge
Material Dimension
Paper DIN A4
Ready
GRP made
Ready
Carbon made
Ready
Foam/Obechi made
Ready
Foam/Obechi made
Ready
made
Balsa
Wire/Plastic
Wood
Plastic / Wood
Steel 12 * 330
D1.3
Spring Steel 1400
Spring steel D1.4 * 400
Plastic D3.2 * 320
Composite
(GRP) D2 * 400
Abachi
10 * 10 *
Abachi 85
Plywood 3mm milled
Plywood 3mm milled
Abachi
Steel M 2.5
Steel M 2.5
Steel M 2.5
Aluminium M 4
Ready
GRP made
Ready
GRP made
Brass M 2.5
Ready
Nylon made
Spring steel D3 * 130
Pre-
installed
Ready
GRP made
Steel 3 * 60 (50)
Steel 2.2 * 13
Aluminium M 4
www.graupner.de
*