Remote 14 Receptacle Information - Miller Phoenix 456 CC/CV Manuel Du Propriétaire

3-7. Remote 14 Receptacle Information

A A J J
K
I
B
C L N
H
M
D G
F F
E E
*The remaining sockets are not used.
24 VOLTS AC 24 VOLTS AC
115 VOLTS AC 115 VOLTS AC
REMOTE REMOTE
OUTPUT
CONTROL
A/V
AMPERAGE AMPERAGE
Ref. ST-801 718 Ref ST-801 718
VOLTAGE
GND GND
Socket* Socket Information
A 24 volts ac. Protected by circuit breaker CB2.
B Contact closure to A completes 24 volts ac con-
tactor control circuit.
I 115 volts ac. Protected by circuit breaker CB1.
J Contact closure to I completes 115 volts ac con-
tactor control circuit.
C Output to remote control; +10 volts dc in MIG
mode.
D Remote control circuit common.
E 0 to +10 volts dc input command signal from re-
mote control.
M Mode select.
N Remote inductance control.
F Current feedback; +1 volt dc per 100 amperes.
H Voltage feedback; +1 volt dc per 10 arc volts.
G Circuit common for 24 and 115 volts ac circuits.
K Chassis common.
OM-188 422 Page 17