Remote 14 Receptacle Rc8; Remote 14 Receptacle Rc8 Information - Miller Delta-Fab Manuel Du Propriétaire

3-10. Remote 14 Receptacle RC8

3-11. Remote 14 Receptacle RC8 Information

24 VOLTS AC 24 VOLTS AC
REMOTE OUTPUT CONTROL
115 VOLTS AC 115 VOLTS AC
GND
REMOTE POWER ON/OFF REMOTE POWER ON/OFF
REMOTE VOLTAGE SENSING REMOTE VOLTAGE SENSING
* Not Used
OM-2241 Page 14
1
A J
K
I
B
C L N
H
M
D G
F
E
Socket
A 24 volts ac. Protected by supplementary protector CB2.
B Contact closure to A completes 24 volts ac contactor control circuit.
C Command reference; 0 to +10 volts dc.
D Remote control circuit common.
E 0 to +10 volts dc input command signal from remote control.
F Current feedback; 1 volt per 100 amperes.
H Voltage feedback; 1 volt per 10 arc volts.
I 115 volts, 15 amperes, 60 Hz ac. Protected by supplementary protector CB1.
J Contact closure to I completes 115 volts ac contactor control circuit.
K Chassis common.
G Circuit common for 24 and 115 volts ac circuits.
To remote On/Off switch. To remote On/Off switch
*
* Voltage sensing signal from Negative (−) weld output terminal.
* Voltage sensing signal from Positive (+) weld output terminal.
Y Turn off power before con-
necting to receptacle.
1 Remote 14 Receptacle RC8
Connect feeder to RC8.
Information
Ref. 800 166-D