Miller Phoenix 456 CC/CV Manuel Du Propriétaire page 14

Masquer les pouces Voir aussi pour Phoenix 456 CC/CV:
Table des Matières

Publicité

1
1
2
OM-188 422 Page 10
2
3
4
V
2
3
1
∠ = <60 °
3
4
5
6
V
> 60 s
V
S-179 190-A
4
5
S-179 304-A
S-179 309-A
5
1
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2
Electric shock from wiring can
kill.
3
Disconnect input plug or
power before working on
machine.
4
Hazardous voltage remains
on input capacitors after
power is turned off. Do not
touch fully charged
capacitors.
5
Always wait 60 seconds after
power is turned off before
working on unit, OR
6
Check input capacitor voltage,
and be sure it is near 0 before
touching any parts.
1
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2
When power is applied failed
parts can explode or cause
other parts to explode.
3
Flying pieces of parts can
cause injury. Always wear a
face shield when servicing
unit.
4
Always wear long sleeves and
button your collar when
servicing unit.
5
After taking proper
precautions as shown,
connect power to unit.
1
Warning! Watch Out! There
are possible hazards as
shown by the symbols.
2
Falling equipment can cause
injury and damage to unit.
3
Always lift and support unit
using both handles. Keep
angle of lifting device less
than 60 degrees.
4
Use a proper cart to move
unit.
5
Do not use one handle to lift
or support unit.
4/96
4/96
1/96

Publicité

Table des Matières
loading

Table des Matières